All Catapult Buildings are professionally anchored at the time of installation. All certified buildings will come with the appropriate quantity and type to meet or exceed your local building codes. Please have a utility locating service come 24-48 hours before we arrive to mark your site.
Catapult Steel Buildings offers a rebar anchor. This is used to anchor the steel tube base rails to the ground/dirt, gravel or asphalt, securing them in the post hole with concrete.
Rebar anchors are recommended in areas of low winds and sturdy soil. Strong winds erode the area around the anchor and this affects the stability of the entire structure.
Catapult Steel Buildings offers rebar anchors that are 1/2" x 32".
Catapult Steel Buildings offers a high wind anchor. These anchors are used for ground installations on our certified buildings.
High wind anchors are an auger type of anchor that "screw" into the earth and offers superior uplift resistance.
We recommend High Wind Anchors for installation in high wind areas and taller structures.
Get your certified building
Catapult Steel Buildings offers a concrete anchor. These anchors are included for all concrete installation.
Concrete anchors are hammered drilled into your existing slab. Catapult Steel Buildings does not recommend "wet setting" of anchors bolts.
Concrete is one of the best, most stable surfaces upon which you can install and anchoring your carport or metal structure.
Catapult Steel Buildings offers an upgraded asphalt anchor. These anchors are available for installation on asphalt.
Asphalt anchors are barbed and offer a superior tie down over the rebar anchor. This anchor should only be used on asphalt surfaces, as it is not effective in concrete or soil installation.