Catapult Steel Buildings will install on just about any level surface. Our buildings are supported by a base rail that runs the length of the building. This rail comes in a single run and is not adjustable. However, the leg height has a 4" adjustment that allows us to compensate for some slope or grade issues. For larger structures, it is recommended that you have your site graded to ensure the strongest structure possible.
***The information below is provided for illustrative purposes. Catapult Steel Buildings does NOT recommend preparing your surface until after the building is ordered and you receive an official copy of the drawings. Catapult Steel Buildings is not responsible for the accuracy of the below information.
Standard Anchoring is included in the base price of the building. For ground installation, we use a 30" rebar spike. Existing concrete slabs will be attached with concrete anchors.
Please see our anchor types page for more information.If you have any doubts:
Call NowCatapult Steel Buildings offers a high wind anchor. High wind anchors are an auger type of anchor that "screw" into the earth and offer superior uplift resistance. We recommend High Wind Anchors for installation in high wind areas and taller structures.
Please see our anchor types page for more information.If you have any doubts:
Call Now
Concrete Pier anchoring is a cost-effective alternative to pouring a slab or footers.
Please see our anchor types page for more information.If you have any doubts:
Call Now
Although we will install on any concrete surface, below are a few of our recommended foundation designs. If you are required to permit the building, check with your local building inspector for requirements.
Please see our anchor types page for more information.If you have any doubts:
Call Now